Ford Mondeo Owner's Manual page 76

Electric folding mirrors
Automatic folding and unfolding
Note: If the mirrors have been folded using
the manual fold button they can only be
unfolded using the manual fold button.
The mirrors will fold automatically when
you lock the vehicle with the key, the
remote control or a keyless entry system
request. The mirrors will unfold when you
unlock the vehicle with the key, the remote
control, a keyless entry system request,
the driver's interior door handle or starting
the engine.
Manual folding and unfolding
The electric folding mirrors operate with
the ignition on.
Note: You can operate the mirrors (mirror
tilting and folding) for several minutes after
you switch off the ignition. They will be
deactivated as soon as a door is opened.
E72623
Press the button to fold or unfold the
mirrors.
Windows and Mirrors
74
If you press the switch again while the
mirrors are moving, they will stop and
reverse the direction of movement.
Note: When the mirrors are operated often
during a short period of time, the system
may become inoperable for a period of time
to prevent damage due to overheating.
Reverse mirror dipping
Depending on the switch position (A or C),
the relevant exterior mirror will dip
whenever you select reverse gear, giving
you a view of the kerb.
Note: You can disable this feature by
leaving the switch in position B.
The exterior mirror will return to the original
position:
If the vehicle speed exceeds 10 km/h
(6 mph).
Approximately 10 seconds after reverse
gear has been disengaged.
If the switch is returned to position B.
When you first use this feature, the mirror
will dip to a preset position. This position
can be adjusted using the following
sequence:
1. Turn the ignition on. Do not start the
engine.
2. Select the desired exterior mirror (A or
C).
3. Select reverse gear, the selected
exterior mirror will adjust to a preset
position.
4. Adjust the mirror to the required dipped
position.
5. Disengage reverse gear or press and
hold the desired memory pre-set
button until a single chime sounds to
confirm. See Memory Function (page
128).
The settings will be stored automatically.