Tyre Repair Kit - Ford Mondeo Owner's Manual

2. Slacken the wheel nuts.
3. Jack up the vehicle until the tyre is clear
of the ground.
4. Remove the wheel nuts and the wheel.
Installing a road wheel
WARNINGS
Use only approved wheel and tyre
sizes. Using other sizes could
damage the vehicle and will make
the National Type Approval invalid. See
Technical Specifications (page 239).
Do not fit run flat tyres on vehicles
that were not originally fitted with
them. Please contact your dealer for
more details regarding compatibility.
CAUTION
Do not install alloy wheels using
wheel nuts designed for use with steel
wheels.
Note: The wheel nuts of alloy wheels and
spoked steel wheels can also be used for
the steel spare wheel for a short time
(maximum two weeks).
Note: Make sure the wheel and hub contact
surfaces are free from foreign matter.
Note: Make sure that the cones on the
wheel nuts are against the wheel.
1. Install the wheel.
2. Install the wheel nuts finger tight.
3. Install the locking wheel nut key.
Wheels and Tyres
E75442
4. Partially tighten the wheel nuts in the
5. Lower the vehicle and remove the jack.
6. Fully tighten the wheel nuts in the
7.

TYRE REPAIR KIT

Your vehicle may not have a spare tyre. In
this case it will have an emergency tyre
repair kit that can be used to repair one
flat tyre.
The tyre repair kit is located in the spare
wheel well.
233
1
3
5
sequence shown.
sequence shown. See Technical
Specifications (page 239).
Install the hub cap or cover using the
ball of your hand.
WARNING
Have the wheel nuts checked for
tightness and the tyre pressure
checked as soon as possible.
4
2