Table of Contents
Advertisement
The safety belt pretensioners are designed to activate in frontal,
near-frontal and side crashes. The safety belt pretensioners at the front
seating positions are designed to tighten the safety belts firmly against
the occupant's body when activated. This helps increase the effectiveness
of the safety belts. In frontal crashes, the safety belt pretensioners can
be activated alone or, if the crash is of sufficient severity, together with
the front airbags.
FASTENING THE SAFETY BELTS
The front outboard and rear safety restraints in your vehicle are
combination lap and shoulder belts.
The presenter arm (available on the coupe only) is intended to improve
access to the safety belt and to allow access to the rear seat.
2014 05+ Mustang (197)
Owners Guide gf, 1st Printing, November 2012
USA (fus)
Safety Belts
Rotate the presenter arm toward
the front of the vehicle until it locks
into place. This allows easier access
to the front safety belt for the front
seat occupant.
To access the second row seats,
rotate the arm back to its original
position against the trim panel.
1. Insert the belt tongue into the
proper buckle (the buckle closest to
the direction the tongue is coming
from) until you hear a snap and feel
it latch. Make sure the tongue is
securely fastened in the buckle.
35
Advertisement
Table of Contents
