Table of Contents
Advertisement
To restore the full function of the tire pressure monitoring system, have
the damaged road wheel and tire assembly repaired and remounted on
your vehicle. For additional information, see Changing Tires with a
Tire Pressure Monitoring System in this section.
When You Believe Your System Is Not Operating Properly
The main function of the tire pressure monitoring system is to warn you
when your tires need air. It can also warn you in the event the system is
no longer capable of functioning as intended. See the following chart for
information concerning your tire pressure monitoring system:
Low tire
Possible cause Customer action required
pressure
warning light
Solid warning
Tire(s)
light
under-inflated
Spare tire in use Repair the damaged road wheel
TPMS
malfunction
2014 05+ Mustang (197)
Owners Guide gf, 1st Printing, November 2012
USA (fus)
Wheels and Tires
1. Make sure tires are at the proper
pressure. See Inflating Your Tires
in this chapter.
2. After inflating your tires to the
manufacturer's recommended
pressure as shown on the Tire Label
(located on the edge of driver's door
or the B-Pillar), the vehicle must be
driven for at least two minutes over
20 mph (32 km/h) before the light
turns off.
and tire and reinstall it on the
vehicle to restore system function.
For a description on how the
system functions, see When Your
Temporary Spare Tire is Installed
in this section.
If the tires are properly inflated
and the spare tire is not in use but
the light remains on, contact your
authorized dealer as soon as
possible.
287
Advertisement
Table of Contents
