Removing And Replacing Light Bulb - Singer 6233 Instruction Manual

Removing and Replacing Light Bulb
CAUTION:
(1
>)
'~\
*
Before changing light bulb,
make
sure
_ m
~
lk- you have removed plug from socket
r
outlet. Be sure to replace the face plate
which covers the light bulb before
I
I | ||| |
\ operating the machine.
* This machine is designed to use a 15-Watt
>1
\ /maximum light bulb.
¢= I /1 To change the light bulb. the face plate must
/t
> s
tfirst
be removed,
* Loosen and remove screw (1)
* Slide face plate down and away from
machine
7
tu s/ .-- lXh To Remove the Light Bulb
I
Push bulb up into socket (2) and turn
|
4
. t.) \ \
N
to the lef to unlock bulb pins
V
*
Pull bulb down and out of socket.
I ,.~~~~~~~~~~~~V
To Replace the Light Bulb
A-
2<' ,
I
. Push new bulb up into socket and turn
to the right until pins lock into position.
.Reposition face plate by sliding top edge
.-
,
E
of plate under edge of top cover
.Line up screw hole in plate with screw
N'
2
i3/hole in machine.
. Insert screw and tighten.
29