Multi-Stitch Zig-Zag - Singer 6233 Instruction Manual

Position the hem under the presser
foot with the soft fold resting against
wall of the guide. Be sure the flange of
the guide is between the soft fold and
the top of the hem, as shown.
l
Lower the presser foot and begin
sewing making certain the straight
stitches tall on the edge of the hem
and the zig-zag stitches just pierce
the soft fold of the work. Adjust stitch
width if necessary. While stitching,
guide the hem edge in a straight line
and teed the soft fold evenly against
the wall of the guide.
\If layers of fabric are pinned together,
remove pins asyou come to them. Do
not sew over pins.
Multi-Stitch Zig-Zag #8
Mending, overcasting, joining or reinforcing can all be done using the Multi-Stitch Zig-Zag.
Mending a Tear
.* Trim ragged edges of tear
* Cut a lining of fabric for reinforcement.
* Bring the edges of tear together and baste
lining to wrong side of fabric.
RECOMMENDED SETTINGS
Stitch Selection: Multi-Stitch
Zig-Zagij#n
Stitch Width:
f
I
Stitch Length: 1 or ower
Foot Special Purpose (j)
Needle Plate: General Purpose (A)
* Place tear, right side up, under presser
foot.
'0~ N.
7N,
.
* Stitch over the line of the tear, shortening
stitch length at each end for reinforce-
* Trim thread ends close to fabric.
* If needed, sew overtear again.
. Trim away lining close to stitching.
22