Back Up Settings; Restore Configuration Settings; Erase - NETGEAR JNR3000 User Manual

N300 wireless gigabit router

Hide thumbs Also See for JNR3000:

Table of Contents

Back Up Settings

To back up the router's configuration settings:



Select Advanced > Administration > Backup Settings to display the following screen:

Click Back Up to save a copy of the current settings.

Choose a location to store the .cfg file that is on a computer on your network.

To restore configuration settings that you backed up:



Enter the full path to the file on your network, or click the Browse button to find the file.

When you have located the .cfg file, click the Restore button to upload the file to the router.

Upon completion, the router reboots.

WARNING!

Do not interrupt the reboot process.

Under some circumstances (for example, if you move the router to a different network or if

you have forgotten the password), you might want to erase the configuration and restore the

factory default settings.

You can either use the Restore Factory Settings button on the back of the router (see

Default Settings

on page 96), or you can click the Erase button in this screen.

Erase sets the user name to admin, the password to password, and the LAN IP address to

192.168.1.1, and enables the router's DHCP.

N300 Wireless Gigabit Router JNR3000

Administration

Factory

Table of Contents