Erase; Set Password - NETGEAR WNR612v3 User Manual

Erase

You can erase the configuration and restore the factory default settings. Some examples are
If you move the router to a different network or if you have forgotten the password.
You can use the Restore Factory Settings button on the back of the router (see
on page 89), or you can click the Erase button in this screen.
Settings
Erase sets the user name to admin, the password to password, and the LAN IP address to
192.168.1.1, and enables the router's DHCP.

Set Password

This feature lets you change the default password that is used to log in to the router with the
user name admin.
This is not the same as changing the password for wireless access. The label on the bottom
of your router shows your unique wireless network name (SSID) and password for wireless
access (see
Label

To set the password for the user name admin:
Select Advanced > Administration > Set Password to display the following screen:
1.
On the Set Password screen, type the old password, and type the new password twice.
2.
Click Apply so that your changes take effect.
3.
N150 2-Port Wireless Router WNR612v3
on page 10).
Administration
58
Factory