Important Safety Instructions - Dynaudio DBM50 User Manual

Table of Contents

Advertisement

The lightning flash with an arrowhead
symbol within an equilateral triangle, is
intended to alert the user to the presence
of uninsulated "dangerous voltage" within
the product's enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
1
Read these instructions.
2
Keep these instructions.
3
Heed all warnings.
4
Follow all instructions.
5
Do not use this apparatus near water.
6
Clean only with dry cloth.
7
Install in accordance with the manufacturer's
instructions.
8
Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9
Do not defeat the safety purpose of the
polarized or grounding-type plug. A
polarized plug has two blades with one
wider than the other. A grounding type plug
has two blades and a third grounding prong.
The wide blade or the third prong are provided
for your safety. If the provided plug does not
fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10 Protect the power cord from being walked
on or pinched particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
11 Only use attachments/accessories specified
by the manufacturer.
12
Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
13 Unplug this apparatus during lightning storms
or when unused for long periods of time.
14 Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as power-supply cord or plug is
damaged, liquid has been spilled or objects
have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or has
been dropped.
DBM50_prelim_2402_2012.indd 1

IMPORTANT SAFETY INSTRUCTIONS

instructions in the literature accompanying the
product.
Warning!
Caution:
You are cautioned that any change or
modifications not expressly approved in this
manual could void your authority to operate this
equipment.
Service
The exclamation point within an
equilateral triangle is intended to alert the
user to the presence of important
operating and maintenance (servicing)
To reduce the risk of fire or electrical shock,
do not expose this equipment to dripping or
splashing and ensure that no objects filled
with liquids, such as vases, are placed on the
equipment.
This apparatus must be earthed.
Use a three wire grounding type line cord
like the one supplied with the product.
Be advised that different operating voltages
require the use of different types of line
cord and attachment plugs.
Always observe the local safety regulations.
Ensure that the factory-set power
requirements for the device (refer to the label
on the back of the monitor) corresponds to the
mains supply in your region.
This equipment should be installed near the
socket outlet and disconnection of the device
should be easily accessible.
To completely disconnect from AC mains,
disconnect the power supply cord from the AC
receptacle.
The mains plug of the power supply shall
remain readily operable.
Do not install in a confined space.
Do not open the unit - risk of electric shock
inside.
There are no user-serviceable parts inside.
All service must be performed by qualified
personnel.
a
15-03-2012 14:36:09

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents