Procedure 2-3: Auto-Detecting Your Internet Connection Type - NETGEAR FR328S Reference Manual

Procedure 2-3: Auto-Detecting Your Internet Connection Type

The Web Configuration Manager built in to the firewall contains a Setup Wizard that can
automatically determine your network connection type.
If your firewall has not yet been configured, the Setup Wizard shown in
1.
launch automatically.
When the Wizard launches, select Yes in the menu below to allow the firewall to automatically
determine your connection.
Figure 2-7: Built-in Web-based Configuration Manager Setup Wizard
Note: If, instead of the Setup Wizard menu, the main menu of the firewall's Configuration
Manager as shown in
bring up this menu.
Click Next
2.
The Setup Wizard will now check for the following connection types:
• Dynamic IP assignment
• A login protocol such as PPPoE
• Fixed IP address assignment
Connecting the Firewall to the Internet
FR328S Cable/DSL ProSafe Firewall with Dial Back-Up
Figure 2-12 appears, click the Setup Wizard link in the upper left to
Figure 2-7 should
2-9