Cabling An Optional Scsi Adapter - IBM 6225 User Manual

Cabling an optional SCSI adapter

You can install an optional SCSI adapter in your computer to control the internal
hard disk drives. With a SCSI adapter installed, you can configure the internal hard
disk drives into disk arrays. You can also cable a SCSI adapter to external hard
disk drives. See your SCSI adapter option documentation for complete instructions
for installing a SCSI adapter in your computer and for additional information about
SCSI adapters.
Notes:
1. An optional SCSI adapter is required for you to connect external SCSI devices.
2. The SCSI cables that are used by the integrated SCSI controller cannot be
Complete the following steps to cable an optional SCSI adapter:
1. Install the SCSI adapter (see "Installing an adapter" on page 35).
2. Connect the SCSI-signal cable to the adapter and one or more of the signal
3. Connect the SCSI-activity-indicator cable to the adapter and to the SCSI-LED
4. Complete the installation of the optional SCSI adapter.
38
IBM IntelliStation M Pro Types 6225 and 6228: User's Guide
used with an optional SCSI adapter.
cable connectors to the rear of the SCSI devices.
connector on the system board. See "System-board internal connectors" on
page 32 for the location of the SCSI-LED connector.
SCSI adapter
SCSI signal cable
connector
SCSI signal cable