Electrical Safety Rules; Maintenance Rules; Service Rules; Storage And Transportation Rules - Ryobi ELT1100QFA Owner's Operation Manual

SPECIFIC SAFETY RULES

ELECTRICAL SAFETY RULES

Make sure the cord is located so that it will not be
stepped on, tripped over or otherwise subjected to
damage or stress.
Do not abuse the power cord. Never carry the product
by the cord. Never pull the plug out of the power point by the
cord. Keep the cord away from heat, oil and sharp edges.
For outdoors work use only suitably approved extension
cables with a min. conductor cross section of 1.5mm
The plug connectors must have earthing contacts and
be rain-water-proof.
To reduce the risk of electrical shock, this product has
apolarized plug (one blade is wider than the other) and
requires the use of apolarized extension cord. This
product plug fits into apolarized extension cord in only
one way. If the plug does not fit fully into the extension
cord, reverse the plug. If the plug still does not fit, obtain
a correct polarized extension cord. Use of a polarized
extension cord requires use of apolarized wall outlet. This
product plug fits into apolarized wall outlet in only one
way. If the plug does not fit fully into the wall outlet, reverse
the plug. If the plug still does not fit, contact aqualified
electrician to install the proper wall outlet. Do not change
the product plug, the extension cord receptacle or the
extension cord plug in any way.
Ground Fault Circuit Interrupter (GFCI) protection should
be provided on the circuits(s) or outlet(s) used for this
product. Receptacles with built-in GFCI protection are
available and may be used.
Inspect extension cords for deterioration, cuts or cracks
in the insulation. Repair or replace the cords if any
defects appear.
A nameplate on the product indicates the unit's voltage.
Never connect the product to an AC voltage that differs
from this voltage.

MAINTENANCE RULES

Maintain the product with care. Follow instructions for
changing accessories. Keep the product dry, clean and
free from oil and grease.
Release the trigger, allow the motor to stop and unplug
the product before making adjustments or repairs.
Do not use the product if parts have been damaged.
Check the product to make sure that it will operate
properly and perform the intended function. Check for
alignment of moving parts, binding of moving parts,
breakage of parts and any other condition that may
affect the unit operation. Inspect the unit's power
connection. Any part that is damaged should be properly
repaired or replaced by a Ryobi authorized service centre.
Keep the product clean of grass clippings and other
materials that may become lodged in the cutting lines.
Never douse or squirt the product with water or any other
liquid. Keep handles dry, clean and free from debris.
After each use, clean with a soft, dry cloth.

SERVICE RULES

Service on this product must be performed by qualified
repair personnel only. Service or maintenance
performed by unqualified personnel could result in injury
to the user or damage to the product. Such service may
also void your warranty.
2
Use only identical replacement parts when servicing the
product. Follow the instructions in the Maintenance
section of this manual. Use of unauthorized parts or
failure to follow maintenance instructions may create a
risk of shock, serious injury to the user or damage to the
product. Such use may also void your warranty.

STORAGE AND TRANSPORTATION RULES

Stop the motor when you are waiting to cut or when you
are walking from one cutting location to another. Store
the product inside in a dry place.
Store the product up high or lock it up to prevent
unauthorized use or damage. Keep the product out of
the reach of children.
Secure the product when transporting it.
Save these instructions. Refer to them frequently
and use them to instruct others who may use this
product. If you loan someone this product, loan these
instructions also.
- 2 -