TOTALINE 1 For All Owner's Manual
Non-programmable digital thermostat
Hide thumbs
Also See for 1 For All:
- Owner's manual (28 pages) ,
- Owner's manual (22 pages) ,
- Owner's manual (25 pages)
Advertisement
OWNER'S MANUAL
1 For All
Non-Programmable
Digital Thermostat
TOTALINE
AUTO
C
76
OOL
H
68
EAT
Meets California Title 24
Use with most Air Conditioning & Heating Systems including: 1 or 2 Stage
Electric Cooling & Gas Heating, Heat Pump, Electric or Hydronic Heat.
TOTALINE
Replacement Components Division
P/N P474-0100
Dual Setpoint
Very easy to program
Thermoglow
Backlight
No batteries required
Auto-Changeover
Locking Keypad
Carrier Corporation 12/06
Advertisement
Related Manuals for TOTALINE 1 For All
Summary of Contents for TOTALINE 1 For All
- Page 1 OWNER'S MANUAL P/N P474-0100 1 For All Non-Programmable Digital Thermostat TOTALINE Dual Setpoint Very easy to program AUTO Thermoglow Backlight No batteries required Auto-Changeover Locking Keypad Meets California Title 24 Use with most Air Conditioning & Heating Systems including: 1 or 2 Stage Electric Cooling &...
-
Page 2: Table Of Contents
ABOUT ADVANCED FEATURES & OPERATION WARRANTY Follow Installation Instructions carefully. CAUTION DISCONNECT POWER TO THE HEATER - AIR CONDITIONER BEFORE REMOVING THE OLD THERMOSTAT AND INSTALLING WARNING THE NEW THERMOSTAT. Replacement Components Division Carrier Corporation 12/06 P/N P474-0100 Page 1... -
Page 3: Front Panel
Front Panel TOTALINE AUTO Liquid Crystal Display with Thermoglow Up/Down Buttons Mode Button Fan Button Heat or Cool Indicator Red = Heat, Green = Cool Page 2... -
Page 4: Display
Display AUTO Fan On Mode Indicators - Page 4 Selects the operational mode of the equipment. HEAT - Indicates the heating mode. COOL - Indicates the air conditioning mode. AUTO - Indicates the system will automatically changeover between heat and cool modes as the temperature varies. -
Page 5: Selecting The Heat Or Cool Mode
Selecting the Heat or Cool Mode Select Mode by Pressing the MODE Button Heating Only The HEAT setting indicates the temperature the room has to reach before the furnace will Press turn on to heat the room. MODE Cooling Only The COOL setting indicates the temperature the room has to reach before the air conditioner... -
Page 6: Basic Operation
Basic Operation Selecting Your Desired Temperature (adjusting the setpoints) AUTO MODE Pressing the UP or DOWN buttons in Auto mode will adjust both the heat and cool set temperatures simultaneously. Adjust the desired AUTO set temperature with the buttons. HEAT OR COOL MODE Pressing the UP or DOWN buttons in Heat or Cool mode will adjust only the heat or cool set temperature. -
Page 7: Advanced Setup
Advanced Setup Press the MODE button. MODE While holding MODE, NOTE: Each step # is located at press the FAN button the top right corner of the for two seconds to enter display for easy reference. Setup screens. Select setpoint configuration: 1 = Single Setpoint 2 = Dual Setpoint Press... - Page 8 Advanced Setup Select Electric Heat operation: On = 1st stage electric heat Off = 1st stage gas heat (Step 6 only appears if heat pump is off in step 4) Press MODE Adjust the deadband for the 1st stage. (1 - 6 ) Press MODE Adjust the minimum difference...
- Page 9 Advanced Setup Select backlight operation: ON - Light continuously OFF - Light for 8 seconds after a button press Press MODE Select thermostat operation in degrees Fahrenheit or Celsius. Press MODE After programming is complete, press the MODE and UP buttons at the same time for two seconds to leave the Setup screens.
-
Page 10: Advanced Setup Table
Advanced Setup Advanced Setup Table Step # Description Range Factory Default Display Mode 1 / 2 Heat Pump Off / On Reversing Valve Polarity O / b Electric Heat Off / On Deadband/Temp. Swing 1st Stage 1 - 6 Minimum Heat/Cool Differential 0 - 6 Cycles Per Hour d, d1, 2 - 6... -
Page 11: About Advanced Features & Operation
About Advanced Features & Operation CALIBRATION - Under normal circumstances it will not be necessary to adjust the calibration of the temperature. If calibration is required, please contact a trained HVAC technician to correctly perform the following procedure. Press the MODE button once. - Page 12 About Advanced Features & Operation Heating Cooling Deadband Deadband Deadband Deadband db 2 db 1 db 1 db 2 (non-adj. 2 ) (adj. 1-6 ) (adj. 1-6 ) (non-adj. 2 ) 1st Stage 2nd Stage 1st Stage Heat Cool 2nd Stage turn on turn on turn on...
- Page 13 About Advanced Features & Operation FACTORY DEFAULTS - If, for any reason, you desire to return all the stored settings back to the factory default settings, follow the instructions below. WARNING: This will reset all Time Period and Advanced Programming to the default settings.
- Page 14 About Advanced Features & Operation KEYPAD LOCKOUT - To prevent unauthorized use of the thermostat, the front panel buttons may be disabled. To disable, or ‘lock’ the keypad, press and hold the MODE button. While holding the MODE button, press the UP and DOWN buttons together.
-
Page 15: Warranty
Warranty Five-Year Warranty - This Product is warranted to be free from defects in material and workmanship. If it appears within five year from the date of original installation, whether or not actual use begins on that date, that the product does not meet this warranty, a new or remanufactured part, at the manufacturer’s sole option to replace any defective part, will be provided without charge for the part itself provided the defective part is returned to the distributor through a qualified servicing dealer.