Installing The Access Point; Installation Requirements - 3Com WL-455 User Manual

2
I
NSTALLING THE
This equipment must be installed in compliance with local and national building codes,
regulatory restrictions, and FCC rules. For the safety of people and equipment, this
product must be installed by a professional technician/installer.
CAUTION: Before installing, see the important warnings and cautions in "Safety
!
Information" on page 11.
I
NSTALLATION
The following items are required for installation:
• Access Point 7250.
• Standard detachable antennas.
• 3Com installation CD.
• Wall-mount installation hardware (supplied): mounting plate, mounting screws,
• If you do not have IEEE 802.3af Power-over-Ethernet LAN equipment, use the
• If your LAN equipment complies with the IEEE 802.3af Power-over-Ethernet
• Standard category 5 straight (8-wire) Ethernet cable.
• To access and use the Web configuration management system, you need a
R
EQUIREMENTS
and plastic anchors for drywall mounting.
3Com AC adapter that comes with the access point.
standard, you can connect directly to the equipment, and the 3Com AC adapter is
not needed.
The cable must be long enough to reach the power supply or the
Power-over-Ethernet LAN port.
If you use the 3Com AC adapter, you need an additional Ethernet cable to connect
the access point to the LAN.
computer that is running Internet Explorer 5.0 or newer and one of the following
A
CCESS
10
P
OINT