Windows Vista Ip Setup - D-Link NetDefend SOHO DFL-160 User Manual

Appendix C. Windows Vista IP Setup
A Windows Vista based PC can be used as the management workstation for setup of a DFL-160.
Usually, configuration of the IP address of the PC's chosen Ethernet interface should not be needed
since the DFL-160 automatically assigns the address using DHCP. If DHCP cannot be used, the
workstation IP address should be configured manually. The steps to do this with Windows Vista are
as follows:
1. Press the Windows Start button.
2. Select the Control Panel from the start menu.
3. Select Network & Sharing Center from the control panel.
4. Select the Manage network connections option.
5. A list of the Ethernet interface connections will appear. Select the interface that will connect to
the firewall.
6. The properties for the selected interface will appear.
123