GE Advantium PSB2200 Installation Instructions Manual page 2

Safetg Information
BEFORE YOU BEGIN
Read these instructions completely and carefully.
IM PORTANT- save these i nstructions for
local inspector's use.
I M PORTANT-
Observe all governing codes
and ordinances.
• Note to Installer - Be sure to leave these
instructions with the Consumen
• Note to Consumer - Keep these instructions
with gour Owner's Hanual for future reference.
• Skill Level - Installation of this appliance
requires basic mechanical and electrical skills.
• Completion Time - 1 Hour.
• Proper installation is the responsibilitg of the
installer. Product failure due to improper
installation is not covered under the warrantg.
See Owner's Manual for warrantg information.
IMPORTANT-
Use this oven onlg for
its intended purpose. Never use the oven for
warming or heating a room. Prolonged use of the
oven without proper ventilation can be hazardous.
CAUTION:
For personal safety, remove house fuse or oven
circuit breaker before beginning installation to
avoid severe or fatal shock injurg.
CAUTION:
For personal safetg, the mounting surface must
be capable of supporting the cabinet load, in
addition to the added weight of the 80-pound oven
and 30-pound drawer, plus additional oven loads of
up to 50 pounds or a total weight of up to 160
pounds.
CAUTION:
For personalsafetg, this product cannot be
installed in cabinet arrangements such as an
island, a peninsula or below a countertop.
CONTENTS
Design Information
Models Available ...................................................................... 2
Product Dimensions and Clearances ............................ 3
Tools and Parts Required .................................................... 3
Parts Supplied .......................................................................... 3
Electrical Tools and Parts Required ................................ 3
Advance Planning .................................................................. 3
Installation Preparation
Electrical Requirements ........................................................ /4
Install Junction Box ................................................................ /4
Preparing the Opening (Installation without
an accessorg storage drawer) .................................. 5%
Preparing the Opening (Installation with
an accessorg storage drawer) .................................. 7-8
Installation Instructions
Step 1, Remove Packaging and Parts .......................... 9
Step 2, Route Conduit ........................................................ 10
Step 3, Install Bottom Trim .............................................. 11
Step/4, Install Mounting Screws .................................... 11
Step 5, Finalize Installation .............................................. 11
MODELS AVAILABLE
Profile Models:
PSB2200NWW-White
PSB2200NBB-Black
PSB2201NSS-Stainless Steel
Monogram Models:
ZSC2200NWW-White
ZSC2200NBB-Block
ZSC2201NSS-Stainless Steel
Monogram Pro Range Models:
ZSC2202NSS-Stainless Steel
NOTE: This unit cannot be installed with an
accessorg storage drawer.
2