Search Procedure - Universal Electronics FOXTEL iQ Advanced User's Manual

Search Procedure

If your device does not respond to the FOXTEL iQ Remote after you have
tried all the Codes listed for your device brand, you may need to search for
your Code. This method will also work if your device brand is not listed at all.
An alternative to this search procedure is to use the FOXTEL iQ Remote's
learning capability described on the following pages of this Guide.
Searching the Code For Your Television
1.
2.
av
3.
select
4.
av
5.
6.
select
7.
av
8.
select
- Some television's do not switch on when the Power button is pressed.
Please try pressing a "number" button to switch your television on
- If you cannot control your device properly, please continue
the Search Method, as you may be using the wrong Code.
Searching the Code for your AMP/TUNER
Follow steps 1 – 8, only step 3 changes into;
Press and hold the select button then also press the 0 button (instead of
red button) and keep both pressed until the LED (top front) shows two short
(red) flashes.
Searching the Code for your DVD / VCR
Follow steps 1 – 8, changing step 3 to:
Press and hold the select button, then press and hold the 6 button. Keep
both buttons held down until the LED on the FOXTEL iQ Remote flashes
twice.
Switch your television on (not on standby).
Press the av button on the FOXTEL iQ remote.
Press and hold the select button, then press and hold
the red button. Keep both buttons held down until the
LED on the FOXTEL iQ Remote flashes twice
Press the av button and release.
Now point the FOXTEL iQ Remote towards your television
and press the Power button.
If your television turns off press the select button to
store the Code
If your television does not turn off, press the av button
again, followed by the Power button. Keep alternating
between the av and the Power buttons until your
television set turns off.
You may have to press these buttons many
times (up to 180 times) so please be patient.
As soon as your television turns off, press the select
button to store the Code.
12