Prepare To Install The Range - GE JSS28 Installation Instructions Manual

Installation Instructions
PREPARE TO INSTALL THE RANGE
• Move range indoors in front of cabinet
opening.
• Protect the kitchen floor! Flatten and place a
piece of the shipping carton in front of the
installation location to protect the flooring.
• Remove packing materials. Remove labels on
door, plastic on trim and panel, and all tape
around the range.
STORAGE DRAWER REMOVAL
[] Pull the drawer out until it stops.
[] Lift the front of the drawer until the stops
clear the guides.
Rail
Stop
[] Pull forward and remove the drawer.
DOOR REMOVAL (optional)
Door removal is not a requirement for
installation of the product, but is an added
convenience. To remove the door:
[] Open the oven door as far as it will go.
[] Push both hinge Hinge
locks down toward
unlocked
the door frame Hing_
to the unlocked
position. This may I
require a flat blade Hingel
screwdriver,
arm
DO NOT LIFT THE DOOR BY THE HANDLE?
[]
Place hands on both sides of "I-_
the door, and close the oven
door to the removal position.
This is half way between the
broil stop and fully closed.
[] Lift door up and out until
the hinge
arms
clear the slots.
Hinge clears slot
NOTE: The oven door is very heavy. Be sure
you have a firm grip before lifting the oven
door off the hinges. Use caution once the
door is removed. Do not lay the door on its
handle. This could cause dents or scratches.
_-I REMOVE SHIPPING MATERIALS
Remove all parts from the plastic bag found
inside the prepack of the oven and save
packaging tape.
2