Epson EasyMP EMP-765 Setup Manual page 44

If using a Macintosh in wired LAN mode
Be sure to click the icon that shows the communication status in the top-right
corner of the computer screen, and check that the it appears as follows. If it
does not appear as "AirPort: Off", the computer might accidentally connect to
the wrong network.
Tip :
To change the setting, click the icon and select "Turn AirPort On" or "Turn AirPort Off".
2 If using Windows
Select "Start" - "Programs" (or "All Programs") - "EPSON Projector" -
"EMP NS Connection" in that order.
If using a Macintosh
Double-click the application folder of the hard disk volume where EMP
NS Connection is installed, and then double-click the EMP NS
Connection icon.
EMP NS Connection starts.
Tip :
If using Windows
• The following window will be displayed after EMP NS Connection is installed and
started for the first time. Select the network adapter that is being used to connect to the
network and then click the "OK" button.
AirPort: Off
Connection to a wireless LAN
is not possible.
43