Epson EasyMP EMP-765 Setup Manual page 25

Connecting Using Easy Connect Mode (Wireless LAN)
Projector name Enter a name for the projector. This name is used to
ESSID g
Password for
WEB control
Projector
keyword
MAC addressg
* The item contents will be cleared if you select the "Clear" button on the
selected item and press [Enter] on the remote control.
24
identify the projector when connected to the network.
The default value is EMPxxxxxx (xxxxxx is the last 6
characters in the MAC address for the wired LAN).
Up to 16 single-byte alphanumeric characters can be
entered.
Enter the ESSID. The initial value is "EPSON." Up to 16
single-byte alphanumeric characters can be entered.
Normally you should enter the same term (character
string) as the ESSID for the computer being connected to.
However, the projector is provided with an automatic
ESSID search function, so that the projector can be
connected even without setting the ESSID to the
computer's ESSID.
Automatic ESSID searching is a function that temporarily
assigns the computer's ESSID to the projector (default
setting). This lets the projector and computer connect
easily without setting both names to match.
If you set a password, entry of that password will be
required when using EasyWeb, and when starting EMP
Monitor.
Up to 8 single-byte alphanumeric characters are available.
If the projector keyword option is set to "ON", keyword
entry will be required to connect to the projector over a
wireless LAN. Use this function to prevent unintended or
unauthorized access to the projector during presentations,
from other points on the wireless LAN.
This option should normally be "ON".
Displays the wireless LAN card MAC address.
If there is no wireless LAN card inserted, the MAC
address will be displayed as "00:00:00:00:00:00".