Epson EasyMP EMP-765 Setup Manual page 35

Connecting in Access Point Mode or Wired LAN Mode
3
Press the [EasyMP] button.
EasyMP standby screen will be displayed.
4
Ensure that the "Config" button at the lower right of the window is
selected, and press the [Enter] button.
5
For a wireless LAN
Tilt the [
button in the left portion of the screen, and then press the [Enter] button.
For a wired LAN
Check that the "wired LAN" - "Basic" button in the left portion of the
screen is selected, and then press the [Enter] button.
6
Wireless LAN only
Position the cursor on "Access point mode", and press the [Enter]
button.
This selects "Access point mode".
34
] button down to move the cursor to "Wireless LAN" - "Basic"