Kenmore 630.1390 Installation Manual page 8

Electrlcal Supply
Dishwasher Electrlcal Rating
Volts Hertz Amperes Watts
120 60 12 1,450
(max)
Ensure that the dishwasher electrical installation is in compliance
with all national and local electrical codes and ordinances.
The dishwasher is designed for an electrical supply of 120V,
60 Hz, AC, connected to a dishwasher-dedicated, properly
grounded electrical circuit with a fuse or breaker rated for
15 amps. Electrical supply conductors shall be a minimum #1 4
AWG copper-only wire rated at 75°C (1 67°F) or higher.
Strip outer casing of electrical wire to expose 2.5" - 3"
(65 - 76 mm) of the inner wires. Then strip 1/2" (13 mm)
casing from each individual wire.
STEP3
Removing the toe panel
Gently rest the unit on its back as shown in Step 4. Remove
the toe panel. Set the toe panel aside. It will be installed
later.