Kenmore 630.1390 Installation Manual page 12

STEP9
Moving dishwasher into the cabinet
iMPORTANT: Do not atlow teg teveters to scratch or mark
floor. Ptace hands where pictured to push into pMace. As you
slide the unit it, guide the water line and drain hose toward
the sink, and electric line beneath the unit. Ensure that the
excess drain hose is pushed through to the cabinet
housing the sink. Units are typicatty positioned so that the
door is flush with cabinet door and drawer fronts. For
optimal noise reduction, ensure side strips are in contact
with cabinet.
STEP10
Attaching the strain relief
Attach the strain relief (not inctuded) to the strain relief
plate. The two screws on the back of the strain relief shouMd
be positioned as shown to prevent interferences during
assembly. Tighten the strain relief lock nut to prevent the
strain retief from turning.
12