Advertisement
REQUIREMENTS
High-EfficiencyWasher
ImportantToInstaller
• PLEASE READ ALLINSTRUCTIONS CAREFULLY BEFORE STARTING T OINSTALL T HE WASHING
MACHINE.THESE INSTRUCTIONS SHOULD BE RETAINED FORFUTURE REFERENCE.
• REMOVE THEDOOR FROM ALL DISCARDED A PPLIANCES T OAVOID THE DANGER OFA CHILD
SUFFOCATING.
• FOR YOUR SAFETY ANDTHEPROPER OPERATION O FYOUR NEW WASHER, THEWASHER
MUSTBE INSTALLED IN ACCORDANCE WITHALL THEINSTALLATION R EQUIREMENTS.
120 Volt60 Hz 15 amp Fuseor CircuitBreaker. I ndividual
branchcircuit serving onlythe washeris recommended. The
washer is equippedwith a powercord.
C A
U
T
I 0
N
I
.EVER
USE EXTEN ,ON
OORD:
I
Applianceis equippedwith a powercord havinga 3-prong
groundingplug for usein a properlyinstalledand groundedoutlet.
,improper Connection of the equipment,grounding conductor can result i n a risk of electrical shoCL Check with a qualified
electrician or serviceman if you arein doubt as to whether the appliance is properly grounded. Do not modify the plug
provided with the appliance -- if it will not fit the outlet, have a proper outlet installed by a qualified electrician.
• To prevent unnecessary risk of fire, electrical shock 0r Peisonal injuryl all Wiring and giounding most be done in
accordance with the National Electrical Code ANSI/NFPA,No. 7O'Latest Revision and local codes and ordinances. It is the
personal responsibility and obligation of the appliance Owner to provide adequate electrical service for this apPiiancel
A groundingkit (PartNo.12001875)is available. It containsthe
ground wire, clamp,groundscrewand washer. Connectthe
ground wire to the back of the unit with the cabinet ground
screw and washer in the hole designated"groundscrew."
Securethe otherend to a grounded,metal,COLD water pipe.
NEVER CONNECTGROUNDWIRE TO PLASTIC
PLUMBING LINES,GAS LINES OR HOTWATER
PIPES.
Advertisement
