1. Manuals
  2. Brands
  3. Amana Manuals
  4. Ranges
  5. AGG200AAW0
  6. Installation instructions manual

Amana AGG200AAW0 Installation Instructions Manual

20" (50.8 cm) freestanding gas range with standard clean oven
Hide thumbs Also See for AGG200AAW0:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Use and Care Manual
INSTALLATIONINSTRUCTIONS
20" (50.8 CM) FREESTANDING GAS RANGE
withStandard Clean Oven
TableofContents
RANGE SAFETY .............................................................................
2
INSTALLATION REQUIREMENTS
...............................................
4
Tools and Parts ............................................................................
4
Location Requirements ...............................................................
4
Electrical Requirements ...............................................................
5
Gas Supply Requirements ..........................................................
6
INSTALLATION INSTRUCTIONS .................................................
7
Unpack Range .............................................................................
7
Install Anti-Tip Bracket ................................................................
7
Make Gas Connection .................................................................
8
Verify Anti-Tip Bracket Is Installed and Engaged ....................... 9
Level Range ...............................................................................
10
Installing/Replacing
the Battery ................................................
10
Battery Status Indicator .............................................................
11
Electronic Ignition System .........................................................
11
Complete Installation .................................................................
13
GAS CONVERSIONS ...................................................................
14
LP Gas Conversion ....................................................................
14
Complete Conversion ................................................................
16
Natural Gas Conversion ............................................................
16
Complete Conversion ................................................................
18
iMPORTANT:
Save for local inspector's use.
Installer:
Leave installation instructions with the homeowner.
Homeowner:
Keep installation instructions for future reference.
W10531342A

Advertisement

Table of Contents
loading

Related Manuals for Amana AGG200AAW0

Summary of Contents for Amana AGG200AAW0

  • Page 1 INSTALLATIONINSTRUCTIONS 20" (50.8 CM) FREESTANDING GAS RANGE withStandard Clean Oven TableofContents RANGE SAFETY ................INSTALLATION REQUIREMENTS ..........Tools and Parts ................Location Requirements ............... Electrical Requirements ............... Gas Supply Requirements ............INSTALLATION INSTRUCTIONS ..........Unpack Range ................Install Anti-Tip Bracket ..............Make Gas Connection ..............

  • Page 2: Range Safety

    RANGE SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word "DANGER"...
  • Page 3 In the State of Massachusetts, the following installation instructions apply: [] Installations and repairs must be performed by a qualified or licensed contractor, plumber, or gasfitter qualified or licensed by the State of Massachusetts. [] If using a ball valve, it shall be a T-handle type. [] A flexible gas connector, when used, must not exceed 3 feet.

  • Page 4: Installation Requirements

    INSTALLATION REQUIREMENTS Dsc@on R!eq Gather the required tools and parts before starting installation. IMPORTANT: Observe all governing codes and ordinances. not obstruct flow of combustion and ventilation air. Read and follow the instructions provided with any tools listed here. • It is the installer's responsibility to comply with installation Tools needed...

  • Page 5: Installation Instructions

    Mobile Home - Additional Installation Requirements Cabinet Dimensions The installation of this range must conform to the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 Cabinet opening dimensions shown are for 25" (64.0 cm) (formerly the Federal Standard for Mobile Home Construction countertop depth, 24"...
  • Page 6 Flexible metal appliance connector: If local codes permit, a new CSA design-certified, 4-5 ft (122-152.4 cm) long, 1/2"(1.3 cm) or 3A,,(1.9 cm) I.D., flexible metal appliance connector may be used for connecting range to the gas supply line. • A 1/2"(1.3 cm) male pipe thread is needed for connection Explosion Hazard to the female pipe threads of the inlet to the appliance Use a new CSA international...

  • Page 7: Install Anti-Tip Bracket

    Line pressure testing above 1/2psi gauge (14" WCP) Burner Input Requirements The range and its individual shutoff valve must be disconnected from the gas supply piping system during any pressure testing of Input ratings shown on the model/serial rating plate are for that system at test pressures in excess of 1/2psi (3.5 kPa).
  • Page 8 Determine and mark centerline of the cutout space. The mounting can be installed on either the left side or right side of the cutout. Position mounting bracket against the wall in the cutout so that the V-notch of the bracket is 77/8 '' (20 cm) from centerline as shown.
  • Page 9 Use a combination wrench and pliers to attach the flexible Remove cooktop burner caps and grates from parts connector to the adapters. Check that connector is not package. Align notches in burner caps with pins in burner kinked. base. Burner caps should be level when properly positioned. If burner caps are not properly positioned, surface burners will not light.
  • Page 10 Repeat steps 1 and 2 to ensure that the range foot is engaged in the anti-tip bracket. If the rear of the range lifts more than 1/2" (1.3 cm) off the floor without resistance, the anti-tip bracket may not be installed correctly.
  • Page 11 Remove the battery holder and insert a new 9V DC alkaline Test the battery by lighting a burner. See "Electronic Ignition battery into it. System" section. The electrode in each burner will spark and make a clicking noise. When the battery needs to be replaced, follow these instructions and remove the old battery before inserting a new battery.
  • Page 12 Check Operation of Cooktop Burners Check Operation of Oven/Broil Burner 1. If control panel and knobs were removed earlier, reinstall 1. Open the oven door knobs. 2. Press in and turn the oven control knob to the "LITE" position 2. Push in and turn each surface unit control knob to the "LITE" position.
  • Page 13 6. When the flame has been properly adjusted, turn the oven off If range does not operate, check the following: and wait for the burner to cool down. • 9V DO alkaline battery is installed correctly. 7. Tighten the shutter screw. •...
  • Page 14 GAS CONVERSIONS Explosion Hazard Use a new CSA International approved gas supply line. instal a shut=off valve. Securely tighten all gas connections. Tip Over Hazard if connected to LP, have a qualified person make sure A child or adult can tip the range and be killed. gas pressure does not exceed 14"...
  • Page 15 Remove the cap from the gas pressure regulator using a 4. Install LP gas orifice spuds using a 7 mm combination flat-blade screwdriver. wrench. NOTE: Do not remove the spring beneath the cap. © A. Cap 5. Turn the cap over so the LP is visible. s ¸...

  • Page 16: Make Gas Connection

    To Convert Oven Burner 1. Open the oven door and remove oven racks, oven tray and flame spreader and set aside. 2. Lift oven burner. The orifice spud is behind the oven burner air shutter. Tip Over Hazard A child or adult can tip the range and be killed. A.
  • Page 17 4. Remove the cap from the gas pressure regulator using a 4. Install the Natural gas orifice spuds using a 7 mm flat-blade screwdriver. combination wrench. NOTE: Do not remove the spring beneath the cap. © A. Cap Turn the cap over so that N or NAT is visible. A.
  • Page 18 To Convert Oven Burner 1. Refer to the "Make Gas Connection" section for properly 1. Open the oven door and remove oven racks, oven tray, and connecting the range to the gas supply. flame spreader and set aside. 2. Turn the manual shutoff valve in the gas supply line to the 2.
  • Page 20 W10531342A 9/12 © 2012 Whirlpool Corporation. Printed in Mexico All rights reserved.

This manual is also suitable for:

Agr3530aaw0

Table of Contents