Life Smart LS-Stealth-6FP User Manual page 7

7) The LIFESMART Infrared Heater can be turned off by pressing the POWER button. DO NOT
TURN OFF THE MASTER POWER SWITCH ON THE REAR OF THE HEATER OR UNPLUG
THE HEATER UNTIL THE FAN SHUTS DOWN. If the heater is left on using the TIME function,
there will be (5) second sound alert to let you know that the time is expiring. If no actions are
taken, the heater will shut off.
8) Note that the temperature displayed on the heater may not always match the temperature
displayed on wall thermostats, thermometers, or other external temperature read-outs. This is
because the heater is often located near the floor, which allows for it to register the temperature
of the cooler air near and around the floor (warmer air rises up). It does not necessarily mean
your room is cooler or that the heater is not heating. If your heater's display and your external
temperature read-out mechanism (thermometer, wall thermostat, etc.) are within a 5 to 6 degree
difference, it is completely normal.
Recommendations for Maximum Performance
1. Be sure not to place the heater in an area where there is too much cross air flow.
2. Direct the heater's vent towards the center of the room and not towards a solid structure, like a
wall for example. For larger areas, place the heater in a centralized location.
3. The LIFESMART Infrared Heater is designed for maximum efficiency in the 68
4. Existing HVAC heating system vents should be closed. This allows the heater to function in an
isolated area.
5. It is not recommended to operate the heater in areas with non-insulated concrete or in structures
with metal walls.
6. If absolutely necessary to use on concrete floors, the floors should be covered to maintain the
heat within the room.
7. If the heater filters become dirty or dusty, they must be cleaned for the heater to operate at its
maximum efficiently.
0 0
F to 74 F range.