Life Smart LS-Stealth-6FP User Manual page 6

4) Again, the default set temperature displayed on the LED display is 72
button, the LED display will switch to the temperature status and flash. You must press the
HI/LOW/UP button or
temperature. Each time you press the HI/LOW/UP button, the temperature setting will increase
0
by 1 F. Press the
temperature setting is 86
(2) seconds, the number rotation will cycle quicker.
5) Press the HI/LOW/UP button to switch from HI (rated at 1500W) to LOW (rated at 1000W). The
default setting is HI.
6) Easily manipulate the flame effect brightness by turning the FLAME knob clockwise for a brighter
effect or counterclockwise to or shut off the flame effect completely.
5 seconds later the
value switches to
ambient temperature
0 0
C/ F/DOWN button once again within (5) seconds to set the desired
0 0
C/ F/DOWN button and the time will decrease by 1
0 0
F (30 F). If you hold the HI/LOW/UP button or
Press TEMP to switch
to temperature status,
then press HI/LOW/UP
button once within 5
seconds to scroll up
From HI to LOW
0
F. By pressing the TEMP
0
F. The maximum
0 0
C/ F/DOWN button for