Product Dimensions - Jenn-Air JUD278DBCX00 Installation Manual

Raised Panel Attachment
A. Drawer front
B. #8 x _" pan-head screw
C. Overlay panel
Drawer Front #8 x 1/2"Pan-head Screw Locations
)
2. Center the custom hardware (left to right) onto the overlay
panel. When installing the custom hardware, be sure that the
mounting screws are flush with the back of the overlay
panels.
3. Repeat the process for the other overlay panel.
Styles 1 and 2: Standard and Overlay
• Height dimensions are shown with the leveling legs extended
to V4" (6.35 mm) below the refrigerator drawers.
• When leveling legs are fully extended to 1" (25 mm) below the
refrigerator drawers, add 3/4"(19.05 mm) to the height
dimensions.
• The power cord is 60" (152.4 cm) long.
26.7"
(67.9 cm)
23.5" 34.0"
(59.6 cm) cm)
r,_
............ i
.... A
A
A. Pre-drilled screw locations
Hardware Installation (optional)
Customer supplied handles (hardware) may be installed at this
time.
1. Measure and mark a line 3" (7.62 cm) down from the top of
the overlay panel as shown.
IMPORTANT: Install hardware a minimum of 3" (7.62 cm)
down from the top of the overlay panel. The space at the top
of the panel is needed in order to attach the overlay panel to
the drawer front.
Drawer Opening Dimensions
Dimensions vary based on model, as shown.
A. Style 1: Standard
B. Style 2: Overlay--Measurement
does net include ¾" (19.05 mm)
overlay panel or optional hardware
A. 3" (7.62 cm) area