INSTALLATION REQUIREMENTS
s c nd
TOOLS NEEDED:
Gather the required tools and parts before starting installation.
Read and follow the instructions
provided with any tools listed
here.
•
Hand drill or electric drill
•
Tape measure
(properly grounded)
•
Level
•
r/8" Drill bit
•
Phillips screwdriver
•
%6" Socket wrench
•
T30 TORX_tscrewdriver
•
6" Socket extension
(optional)
Additional Tools Needed for Style 2: Overlay (only):
•
Scissors
•
Scribe
•
Pencil
PARTS NEEDED Style 2: Overlay (only):
•
Custom Overlay Drawer Panels --
See "Style 2: Custom Overlay Drawer Panels."
Hardware
#8 x 1/2"Pan-head screws (12) optional
PARTS SUPPLIED:
•
#8 x 1/2"Pan-head
screws (16)
•
Double-sided
tape
•
Mounting Brackets (4)
If you plan to install custom wood panels, you will need to create
the panels yourself or consult a qualified cabinetmaker
or
carpenter, See dimension drawings for panel specifications,
IMPORTANT:
•
The thickness of the overlay panels must be 3/4"(19.05 mm).
•
To avoid damage to the drawers, each overlay panel must not
weigh more than 10 Ibs (4.5 kg).
•
Do not exceed the height dimension for the overlay panels.
Panels that exceed the height dimension may damage the
refrigerator drawers, cabinets or countertop.
•
The width of the overlay panels may vary according to the
width of the cabinet opening.
Top Overlay Drawer Panel Dimensions
1.25"
(3.2 cm)
T
10.5"
(26.7 cm)
26.5"
(67.4 cm)
.........................
T
12.7"
(32,2 cm)
235
(59.7 cm)
1.5"
(3.8 cm)
Bottom Overlay Drawer Panel Dimensions
26.5"
(67,4 cm)
7/8"
(22°m'T ........................
T
14.5"
16.5"
(36,8 cm)
(42.0 cm)
23.5,,
(59,7 cm)
1.5"
(3.8 cm)
Flat Panels
You can create a custom flat panel using material less than %"
(19.05 mm) thick. The material must be laminated to either
plywood or medium density fiberboard that is %" (19.05 mm)
thick.
Raised Panels
You can create a raised panel design. Be sure to maintain a %"
(19.05 mm) minimum thickness where the overlay panel attaches
to the drawer front.
1-®TORX is a registered trademark
of Textron Innovations
Inc.