Table of Contents
Advertisement
Available languages
Available languages
©
©
Cabinet
Construction
To eliminate the risk of cabinet
burns and fire, do not have cabinet storage space
above the range. If there is cabinet storage space
above range, reduce risk by installing a range
hood that projects horizontally a minimum of 5"
(12.7 cm) beyond the bottom of the cabinet.
Cou ntertop
Preparation
• The cooktop sides of the range fit over the
cutout edge of your countertop.
• If you have a square finish (flat) countertop,
no countertop preparation is required. Cooktop
sides lay directly on edge of countertop.
• Formed front-edged
countertops must have
molded edge shaved flat 3/4" (1.9 cm) from
each front corner of opening (Figure 2).
• Tile countertops
may need trim cut back 3/4"(1.9 cm)
from each front corner and/or rounded edge flattened
(Figure 2).
Min.
Cutout
Width
(1.9 cm)
I
(1.9cm)
311/z'_
(81 cm)
Formed
or tile countertop
trimmed
%" (1,9 cm) back at
front
corners
of countertop
opening.
Figure 2
• if the existing
cutout
width
is greater
than
30-1116" (76,4 cm), reduce the 3A" (I .9 cm)
dimension.
Countertop
must be level. Place a level on the
countertop, first side to side, then front to back. If the
countertop is not level, the range will not be level. The
oven must be level for satisfactory baking results.
Cooktop sides of range fit over edges of countertop
opening.
Q
• For
cutout width
of
existing
29" (73.7 cm) (Figure 3):
You must also clear 2 3/16"
(5,56 cm) of material
from
front
of countertop,
11/4"
.(3.2 cm)
Advertisement
Table of Contents
