Using two or more people, grasp sides of dishwasher door
frame and place dishwasher on its back.
Using a flat-blade screwdriver, turn the plastic fasteners 1/4turn
counterclockwise
to unlock them. Remove the panel. Do not
remove tech sheet from access panel.
Using a 1,_,,hex head socket, nut driver or Torx ® T20 ®
screwdriver, remove terminal box cover. Retain for later use.
0
Install a UL Listed/CSA Approved
strain relief. Make sure
screwheads are facing to the left when tightening conduit nut.
Strain relief is provided with the power supply cord kit.
NOTE= If using Option B, proceed to "Determine
Cabinet
Opening,"
to continue with the installation of your dishwasher.
Make Power Supply Cord Connection
Option A, Power Supply Cord;
0
Route cord so that it does not touch dishwasher motor to lower
part of dishwasher tub. Pull cord through strain relief in terminal
box.
12