Amulet High Definition Television Receiver User's Guide
CONTROLLING THE AMULET
Amulet uses InfraRed (IR) to receive remote control signals. IR signals travel only short distances (40 feet
or less), and cannot go through walls or other solid objects. You must point the remote control to the
Amulet, with no objects blocking the line of sight.
Figure 7-2 IR Reception Range
ATTENTION: Amulet must use new URC PLUS remote controls. Old remote controls without the "URC
PLUS" logo do not work with Amulet. If the URC PLUS remote control shipped with Amulet has a silver
back; it is an iURC remote (IR URC) which sends IR signals by default, and you can skip the following steps
to register the remote in IR mode.
22
Copyright © 2008 Entone, Inc. All rights reserved
.