Wells WVAE55F Owner's Manual page 14

PREPARATION PRIOR TO OPERATION (continued)
IMPORTANT:
Serious damage to the frypot
will result if the rollers are
missing or do not rotate freely.
Examine the CRADLE ROLLERS. Adjust or tighten as required.
Lubricate the rollers with vegetable oil.
DO NOT operate the fryer unless CRADLE ROLLERS are in place
and rotating freely.
RETAINING NUT
ROLLER
Install LIFT CRADLE onto CRADLE PIVOT. Set FRY BASKET on
LIFT CRADLE.
FILTER RAIL "A"
UPPER
FILTER SCREEN
SEPARATOR
LOWER
FILTER SCREEN
FILTER RAIL "B"
Note: "O" RING
"O" RING
SPARE
"O" RINGS
FILTER
RESERVOIR
Install FILTER LEAF into FILTER RESERVOIR.
SUCTION TUBE O-RINGS are shipped from the factory installed on
SUCTION TUBE; Examine to verify one O-RING is in the groove
closest to the end of the tube.
Install assembled FILTER RESERVOIR into fryer. O-RING for the
filter reservoir suction tube, and up to three spare O-RINGS, are
stored as shown above.
RESERVOIR
ASSEMBLY
CROSS-SECTION VIEW
ASSEMBLED FILTER LEAF
(spout with O-RING inserts
into drain opening)
12
"O" RING IN
"O" RING GROOVE
STORAGE FOR 3
SPARE "O" RINGS