Data Settings - Kyocera Kona User Manual

2. Select Voicemail or Messages.
3. Select Single Tone (once only) or Repeated Tone (once every minute).
Persistent Alerts
Set alerts, such as beep, vibration, or LED blinking for notifications.
1. Press > Settings > Others > Alerts > Persistent Alerts.
2. Select from the following options:

Audible Tone to beep when notification is on the notification bar.

Vibrate to vibrate when notification is on the notification bar.

Blink LED to
3. Select On or Off.

Data Settings

You can turn on or off your phone's data services.
Enable Data Services
Although your phone's data services are turned off by default, you may enable them at any time.
1. Press > Settings > Others > Data Settings > Data > On. (A message is
displayed.)
2. Press YES (left softkey) to enable data services.
Disable Data Services
You can disable data services again without turning off your phone. However, you will not have
access to all data services, including Web and messaging. Disabling data services will avoid
any charges associated with these services. While signed out, you can still place or receive
phone calls, check voicemail, and use other voice services.
1. Press > Settings > Others > Data Settings > Data > Off.
2. Read the disclaimer and press DISABLE (right softkey) to sign out.
Net Guard
When you first connect to the Web, the Net Guard will be displayed to confirm that you want to
connect. The Net Guard helps you avoid accidental connections. You can disable the Net Guard
in the future by selecting Auto-Connect when you see Net Guard displayed.
Settings
blink the LED indicator when notification is on the notification bar.
86