Call Forwarding; Set Up Speed Dialing - Kyocera Kona User Manual

5. When you're connected to the second party, press
6. To end the 3-way call, press
Note: If one of the people you called hangs up during your call, you and the remaining caller
stay connected. If you initiated the call and are the first to hang up, all callers are
disconnected.

Call Forwarding

Call Forwarding lets you forward all your incoming calls to another phone number – even when
your phone is turned off. You can continue to make calls from your phone when you have
activated Call Forwarding.
Note: You are charged a higher rate for calls you have forwarded.
To activate Call Forwarding:
1. Press
2. Enter the area code and phone number to which you want your calls forwarded.
3. Press . You will hear a tone to confirm the activation of Call Forwarding.
To deactivate Call Forwarding:
1. Press
2. Press . You will hear a tone to confirm the deactivation.

Set Up Speed Dialing

You can store up to 98 numbers in your phone's speed dial memory. To make a call using
speed dial, see Call Using a Speed Dial
To assign a speed dial number to a contact:
1. From standby mode, press CONTACTS (right softkey).
2. Select an entry and press
3. Select the number and press OPTIONS (right softkey) > Set Speed Dial.
4. Select an available speed dial location and press
To remove a number from a speed dial location:
1. From standby mode, press CONTACTS (right softkey).
Phone Calls
.
.
.
Number.
.
24
again to begin your 3-way call.
.