Data Settings; Setting The Phone To Receive Data Or Faxes - Kyocera Slider Remix KX5 User Manual

Note:
You must first establish a second phone
line with your service provider. Once established,
a second phone number becomes available in the
menu for selection:
→
1. Menu Settings
Select
Set Phone Line
.
2.
Select one of the two lines and press

Data Settings

Setting Com port speed
The Com Speed sets the data rate at which your
phone connects to a laptop or PC, or at which it
sends and receives over-the-air text messages.
→
1. Menu Settings
Select
Com Port Speed
.
2.
Select the speed. The options are:
115.2 kbps
(default),
Note:
There may be a higher charge for
making calls using high-speed data in areas
where 1X service is available. Check with your
service provider for details.
Setting the phone to receive data
or faxes
Your phone may be able to receive certain data or
faxes, depending on the system sending the
information. You cannot receive voice calls while
the phone is in data/fax mode.
44
→ →
Network
.
→ →
Accessories
19.2 kbps
230.4 kbps Other
, and .
To receive data or faxes, you must connect the
phone to a laptop or PC and switch the phone
from voice mode to data/fax mode.
Note:
To purchase a cable, call 800-349-4188
(U.S.A. only), 858-882-1410, or visit
www.kyocera-wireless.com/store
1.
Connect the phone to the laptop or PC.
2.
Set the Com speed.
3. Menu
Select
Data/Fax Calls
4.
Press to select an option:
Voice only
–
Fax next call
– ,
phone to fax mode or data mode for the
next incoming call or the next 10 minutes.
Fax until off
– ,
,
phone into fax mode or data mode until
the phone is turned off.
Note:
You cannot receive voice calls while the
phone is in data/fax mode.
Connecting to a TTY/TDD device
You can connect the phone to a TTY device for the
hearing impaired.
using the phone with a TTY device.
1.
Connect the TTY device to the phone.
2.
Enter
your keypad.
3.
Press
.
→ →
Settings Network
.
allows only voice calls.
Data next call
or ,
Data until off
or ,
Note:
Enable TTY only when
TTY
to select the option.
Customizing Your Phone
→
sets the
forces the
from