Haier AS072XVERA Operation And Installation Manual page 13

Operation
A
TEMP
ON
OFF
FAN
HEALTH
1
4
5
MODE HEALTH AIRFLOW
SLEEP FRESH SWING
SET
CLOCK
TIMER
STERILIZE
RESET CODE LIGHT LOCK
1
Press ON/OFF button
Unit starts running.
The previous status appears on the display
(except. TIMER, SLEEP mode)
Press MODE button. For each press, operation mode changes
2
as follows:
Remote
AUTO COOL
controller
Select Drying operation shows"
Dry operation starts
Select temp. button
3
Press TEMP button
Every time the button is pressed, temp. setting increases 1 C
Every time the button is pressed, temp. setting decreases 1 C
If the button is kept pressed, setting will increase or decrease
quickly.
Press FAN button. For each press, fan speed changes as
4
follows:
Remote
LOW
controller
Unit runs at the speed displayed on LCD.
In DRY mode, when room temp.becomes 2 C lower than temp.
setting,unit will run intermittently at LOW speed regardless of FAN
setting.
Press ON/OFF button
5
Unit stops running, and when
entering this mode for the next
time, it will show the previous setting
11
DRY FAN
"
MID HIGH
COOL operation starts when room
temp. is higher than temp. setting.
Temp.setting+2 C
Temp.setting
Dry
HEAT
AUTO
Ultra-low air flow
On reaching 2 C lower than temp.
setting,unit will run in mild DRY mode.