Haier AS072XVERA Operation And Installation Manual page 11

Operation
A
TEMP
ON
OFF
HEALTH
4
5
MODE HEALTH AIRFLOW
SLEEP FRESH SWING
CLOCK SET
TIMER
STERILIZE
LIGHT LOCK
RESET CODE
Note:
During Auto run operation, temp. setting will be shown in LCD display, unit will select heating,
cooling or fan operation according to the room temp.
Remote
controller
3
FAN
Remote
controller
Press ON/OFF button
1
Unit starts running.
The previous status appears on the display
(except. TIMER, SLEEP mode)
2 Press MODE button. For each press,
operation mode changes as follows:
AUTO COOL
Select Auto run,
" " appears and auto run starts.
3 Select temp. button
Press TEMP button
Every time the button is pressed, temp.
setting increases 1 C
Every time the button is pressed, temp.
setting decreases 1 C
If the button is kept pressed, setting will
increase or decrease quickly.
Press FAN,For each press, operation mode
4
changes as follows:
LOW MID
Unit runs at the speed displayed on LCD.
When fan speed is AUTO,it is changed automatically
according to the indoor temperature.
Press ON/OFF button
5
Unit stops running.
9
Auto
DRY FAN HEAT
HIGH AUTO