Haier AS072XVERA Operation And Installation Manual page 12

Operation
A
TEMP
ON
OFF
FAN
HEALTH
1
4
5
MODE HEALTH AIRFLOW
SLEEP FRESH
SWING
CLOCK SET
TIMER
STERILIZE
LIGHT LOCK
RESET CODE
1
Press ON/OFF button
Unit starts running.
The previous status appears on the display
(except. TIMER, SLEEP mode)
Press MODE button. For each press,
2
operation mode changes as follows:
Remote
AUTO COOL
controller
Select cooling operation, Shows"
Cooling operation starts.
3 Select temp. button
Press TEMP button
Every time the button is pressed, temp.
setting increases 1 C
Every time the button is pressed, temp.
setting decreases 1 C
If the button is kept pressed, setting will
increase or decrease quickly.
4 Press FAN button. For each press, fan speed
changes as follows:
Remote
controller
Unit runs at the speed displayed on LCD.
When fan speed is AUTO,it is changed automatically
according to the indoor temperature.
Press ON/OFF button
5
Unit stops running,and when entry this mode for the
next time,it will show the previous setting.
10
DRY FAN
LOW MID
Cooling
HEAT
"
HIGH AUTO