Troubleshooting; Customer Support - One for All DVD Expert User Manual

TROUBLESHOOTING

PROBLEM:
SOLUTION: Replace batteries with two new AAA
PROBLEM:
SOLUTION: Make sure the remote control is aimed at
PROBLEM: The unit does not control home enter-
SOLUTION: Try all listed codes for the device brands
PROBLEM: Changing channels does not work
SOLUTION: If the original remote control required
PROBLEM: Tried Searching For Your Code method
SOLUTION: Clear the device key as follows: Press and
PROBLEM:
SOLUTION: Due to RCA design (1983-1987), only the
PROBLEM: No remote control of volume.
SOLUTION: See Changing Volume Lock on page 16 to
PROBLEM: If the above does not work.
SOLUTION: Please contact us in any of the
(red light) does not blink when you
LED
press a key.
alkaline batteries.
blinks when you press a key, but
LED
home entertainment device does not
respond.
your home entertainment device and is
not farther than 15 feet away.
tainment devices or commands are not
working properly.
being set up. Make sure they can be
operated with an infrared remote control.
properly.
pressing ENTER to change channels,
then press
ENTER
after entering the channel number.
and still could not find a working code.
hold until the
SET
twice, then release. Next enter
Then press the device key to be cleared
twice. Now repeat the Searching For Your
Code method on page 10.
L
and
CH CH
RCA TV.
original remote control will operate these
functions.
lock/unlock volume.
following ways:
• Please visit : www.oneforall.com
• If the above website is not able to
provide you with the information you
need, please email us at
ofasupport@ueic.com

• Customer Support : (330) 405-8612

on the remote control
(red light) blinks
LED
M
do not work for your
31
- - .
9 9 2