Saddle; Starting Pedal; Rear Brake Pedal; Gear Pedal - GAS GAS HALLEY 125 SM/EC 09 User Manual

ON
Open
OFF
Closed
RES: This refers to the fuel reserve. If you should run out of fuel on
the road, turn the lever to this position.
ATTENTION
If you must use the reserve, remember to fill the tank as soon as
possible!
After refuelling, turn the fuel-tap lever (C) back to the "ON" position.

SADDLE

This has been joined to the chassis by means of a screw secured
to the tank and its housing in the saddle tongue. The rear section
is also secured with screws that must be tightened through the top
of the number plates.
STARTING PEDAL (E)
The pedal has been placed on the right-hand side of the motorcycle
and is in the off-position; pull to place it in the on-position.
ON: Fuel flows
into the
carburettor when
the lever is in this
position. Normal
operation of the
moped is
RES
achieved with the
Reserve
lever in this
position.
(C)
REAR BRAKE PEDAL (D)
The rear brake pedal is located on the right side of the lower chassis.
Activate it to apply the brake to the rear wheels.

GEAR PEDAL

The vehicle features a 6-speed gearbox.
The change pedal is located on the left side of the engine and is
used in combination with the clutch when changing gears.
15
- -
(E)
(D)
(D). Rear brake pedal.
(E). Starting pedal.
(F). Gear
pedal.