Event Logging Procedures; About Event Logging; Viewing The Event Log - Honeywell Ademco VISTA-21iP User Manual

Ademco vista series

Hide thumbs Also See for Ademco VISTA-21iP:

Installation and setup manual (96 pages)

Programming manual (25 pages)

Quick manual (2 pages)

Table Of Contents

Table of Contents

About Event Logging

The system records various events in a history log, which can be viewed by the master

user on an Alpha Display keypad.

• The Event Log holds up to 100 events.

• Events are displayed in chronological order, from most recent to oldest.

• When the log is full, the oldest event is replaced by the logging of any new event.

Viewing the Event Log

(Master Code)

2. The system displays the most recent event as follows:

• event number

• type of event, identified by its corresponding code

(refer to the code table that follows)

• zone or user number (depending on type of event)

• partition in which event occurred

• time and date of the event's occurrence.

3. Pressing [∗] displays previous events (back in time).

Pressing [#] displays events forward in time.

4. Exit the event log by pressing any key other than [∗]

or [#].

Understanding the Type of Event Displayed

If the event code is preceded by an E (as in the above display), it means that the

event is new and ongoing; if preceded by an R, it means the event has been restored.

Code

Definition

110

Fire Alarm

121

Duress

122

Alarm, 24-hour Silent

123

Alarm, 24-hour Audible