Checking For Open Zones; Using The [∗] Key To Display And Announce System Status - Honeywell Ademco VISTA-21iP User Manual

Checking For Open Zones

Using the [∗ ∗ ∗ ∗ ] Key to Display and Announce System Status
B
efore arming your system, all protected doors, windows and other protection zones
must be closed or bypassed; otherwise the keypad will display a "Not Ready"
message.
Use the READY key to display all faulted zones, making it easier for you to identify
and secure any open zone.
1. Press [ ✱ ] (do not enter code first) to display faulted
zones.
2. Secure or bypass the zones displayed.
The keypad's READY indicator lights when all
protection zones have been either closed or bypassed.
3. Arm the system as desired.
Voice Status: Voice keypads (if installed), can announce system status and faulted
zones (up to 3 zone descriptors) if the Voice Status feature is turned on.
To turn the Voice Status feature on/off:
(also turns on Voice Chime mode; see Chime mode section)
To announce Status: Press [#] FUNCTION + [0] VOICE + [∗] STATUS key.
To announce faults
and status:
– 16 –
(Announces current system status; e.g., "Disarmed Ready to
Arm.")
Press [#] FUNCTION + [0] VOICE + [∗] STATUS + [∗] again
(Announces up to three faulted zones with their zone
descriptors, if programmed.)
Alpha Display:
DISARMED
HIT ∗ FOR FAULTS
Fixed-Word Display:
Zone no. and "NOT READY"
# + 0 + 2 + 4