Elation CUEPIX BLINDER WW2 User Manual page 6

S A F E T Y I N S T R U C T I O N S
For proper operation, follow the Installation guidelines described in this manual. Only qualified and
•
certified personnel should perform installation of this fixture and only the original rigging parts (brackets,
holders, clamps, safety cables) included with this fixture should be used for installation. Any modifications
will void the original manufactures warranty and increase the risk of damage and/or personal injury.
Never look directly into the light source of this fixture to prevent risk of injury to your retina, which may
•
induce blindness. Those suffering from EPILEPSY should avoid looking directly into the light source of this
unit at all times.
The fan and air inlets must remain clean and never blocked. Allow approx. 6" (15cm) between this fixture
•
and other devices or a wall for proper cooling.
The CUEPIX BLINDER WW2
equipment. To guarantee a smooth operation, it is important to follow the
guidelines in this manual. The manufacturer of this device will not accept
responsibility for damages resulting from the misuse of this fixture due to the
disregard of the information printed in this manual.
This device falls under PROTECTION CLASS 1. It's essential this device is
grounded properly, and only qualified personnel perform all electrical
connections.
6
w w w . e l a t i o n l i g h t i n g . c o m
™ is an extremely sophisticated piece of electronic
CUEPIX B LINDER W W2
U ser M anual 1 .0
™