OPERATION AND IMPORTANT RIDING POINTS
Recommended shift points
The recommended shift points during
acceleration and deceleration are
shown in the table below.
CF-05E
Acceleration
shift point
km/h (mi/h)
1st → 2nd
16 (9.9)
2nd → 3rd
24 (14.9)
3rd → 4th
32 (19.9)
4th → 5th
40 (24.9)
5th → 6th
48 (29.8)
5
EAU02989
Engine break-in
There is never a more important period
in the life of your engine than the period
between 0 and 1,600 km (1,000 mi).
For this reason, you should read the
Deceleration
following material carefully.
shift point
km/h (mi/h)
Since the engine is brand new, do not
–
put an excessive load on it for the first
25 (15.5)
1,600 km (1,000 mi). The various parts
25 (15.5)
in the engine wear and polish them-
25 (15.5)
25 (15.5)
selves to the correct operating clear-
ances. During this period, prolonged
full-throttle operation or any condition
that might result in engine overheating
must be avoided.
EAU01128
0–1,000 km (0–600 mi)
Avoid
5,000 r/min.
1,000–1,600 km (600–1,000 mi)
Avoid
6,000 r/min.
CAUTION:
_
After 1,000 km (600 mi) of operation,
the engine oil must be changed and
the oil filter cartridge replaced.
_
1,600 km (1,000 mi) and beyond
The vehicle can now be operated
normally.
CAUTION:
_
G
G
_
5-5
prolonged
operation
prolonged
operation
Keep the engine speed out of
the tachometer red zone.
If any engine trouble should oc-
cur during the engine break-in
period,
immediately
have
Yamaha dealer check the vehicle.
EAU03749*
above
above
EC000052*
EC000053
a