Drolet Escape 1800 Insert Installation And Operation Manual page 52

Escape 1800 Insert Installation and Operation Manual
52
Insert the superimposed brackets (F) and
(G) with the screws (H) in the groove of
each decorative trim (I), (J) and (K) (see
DETAIL B). Align the corners of the angled
side of each trim, and then tighten the
screws (L) to secure the trims.
Align the trim assembly with the left and
right edge of the faceplate and slowly slide
it down over the faceplate.
Secure the trim to the faceplate by
squeezing the eight trim retainers (L)
between the inner edge of the trim and the
front of the faceplate. As in the image on
the left.