Acpi Function - Foxconn 45CMX User Manual

► ACPI Function

This item is used to enable or disable the ACPI function.
► ACPI Suspend Type
This item is used to set the energy saving mode of the ACPI function. When you select "S1
(POS)" mode, the power is always on and computer can be resumed at any time. When
you select "S3 (STR)" mode, the power will be down after a period of time. The status of the
computer before it entering STR will be saved in memory, and the computer can quickly return
to previous state when the STR function wakes.
When you select "S1&S3", it means OS will automatically take care and assign which mode is
the most suitable now.
► Soft-Off by PWR-BTTN
This item is used to set the power down method. This function is only valid for systems using
an ATX power supply. When set to [Delay 4 Sec.], the power button will put the system in
Suspend mode if you push the power button in less than 4 Second then release. If set to
[Instant-Off], the PC powers off immediately when the power button is pressed.
► HPET Support
HPET stands for High Precision Even Timer. If you have the HPET disabled, then windows
does not have access to it and therefore falls back to less accurate timing methods. This item
is used to enable or disable the HPET Support.
► HPET Mode
This item is used to set the �PET Mode. Configuration options: [32-bit mode]; [64-bit mode].
It can be available only when the HPET Support is enabled.
► Power Management Events
Press <Enter> to select the submenu..
Power Management events
PCI Express PME
Wake-Up by PCI card
Wake-Up on LAN
USB KB Wake-Up from S3
Resume by Alarm
Date(of Month) Alarm
Time(hh:mm:ss) Alarm
Power On by Mouse
Power On by Keyboard
KB Power ON Password
Hot Key Power ON
PWRON After PWR-Fail
↑↓→←:Move Enter:Select
► PCI Express PME
This item is used to enable/disable PCI PME# event to generate a wake up. PME# is a signal
which can be triggered from a PCI card. It represents Power Management Event.
Phoenix - AwardBIOS CMOS Setup Utility
Power Management Events
[Enabled]
Enabled
[Enabled]
[Enabled]
[Disabled]
[Disabled]
0
0 : 0 : 0
[Disabled]
[Disabled]
Enter
Ctrl-F1
[Off]
+/-/PU/PD:Value F10:Save
F5: Previous Values F7: �ptimi��ed Defaults
38
Item Help
Menu Level ►
ESC:Exit F1:General �elp