Standard Cmos Features - Foxconn 45CMX User Manual

Standard CMoS features

This submenu is used to set up the standard BI�S features, such as the date, time, floppy drive
and so on. Use the arrow up/down keys to select an item, then use the <+> or <-> keys to change
the setting.
Date (mm:dd:yy)
Time (hh:mm:ss)
► IDE Channel 0 Master
► IDE Channel 0 Slave
x IDE Channel 1 Master
x IDE Channel 1 Slave
IDE Channel 2 Master
IDE Channel 2 Slave
IDE Channel 3 Master
IDE Channel 3 Slave
Drive A
Halt On
Installed Memory
BI�S ID
↑↓→←:Move Enter:Select
► Date - <weekday><month><date> <year> format
Day—weekday from Sun. to Sat., automatically displayed by BIOS (Read Only).
Month—month from 1 to 12.
Date—date from 1st to 31st.
Year—year, set up by users.
Use <Enter>, <Tab> keys to select a field. Use <+>, <->, <PageUp> or <PageDown> to select
a value.
► Time - <hour> : <minute> : <second> format
This item allows you to configure the desired time. Use <Enter>, <Tab> to move forward and
select a field. Directly input a value or use <PageUp>, <PageDown>, <+> or <-> to select a
value.
► IDE Channel 0/1/2/3
These categories identify the hard disks connected to the PATA and SATA ports in the system.
The display of each channel will be different if the setting of On-Chip Serial ATA (in OnChip
IDE Device menu) is set to [Combined], [Enhanced] or [SATA Only] mode. Please refer to
Page 32-33 for detail.
In each channel's display, you can press [Enter] to go to its submenu. You can further config-
ure specific drive settings. [None] and [Auto] settings allow you to enable or disable this drive.
[None] means no HDD is installed or set, and [Auto] means the system can auto-detect the
hard disk when booting up. In Access Mode setting, selections of [CHS], [LBA], [Lage] and
[Auto] can help you to select hard drive for legacy compatibility.
Phoenix - AwardBIOS CMOS Setup Utility
Standard CMOS Features
Wed, Nov 7 2007
17 : 44 : 13
[�DS728080PLAT20]
�DS728080PLAT20
[DVD-ROM DDU1642]
None
None
[ None]
[ None]
[ None]
[ None]
[1.44M, 3.5 in.]
[All , But Keyboard]
1024M
945M09-GA.F1.D.10
+/-/PU/PD:Value F10:Save
F5: Previous Values F7: �ptimi��ed Defaults
22
Item Help
Menu Level ►
Press [Enter] to enter
next page for detail
hard drive settings
ESC:Exit F1:General �elp