Table of Contents
Advertisement
3.2 Crestron e-Control
3.2.2 Tools window
2
1
3
Configures the settings
Click the [Exit] button to return to the Main window.
NOTE
• If two-byte characters are used, the input text or numbers cannot be
set correctly.
• Any items on this window cannot be left blank.
1. Crestron Control
Configures the settings of Crestron
Item
IP Address
IP ID
Port
To apply the settings, click the [Send] button.
2. Projector
Configures the network settings of the projector.
Item
Projector Name
Location
Assigned To:
The usable symbols are space and the following:
!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~
To apply the settings, click the [Send] button.
®
(continued)
between
the projector and Crestron
®
control system devices.
Configures the IP address of the control system.
Configures the IP ID of the control system.
Specifies the port number used for communication by the
control system.
Configures the name of the projector. The length of the
Projector Name can be up to 64 alphanumeric characters.
Configures the location name of the projector. You can specify
a Location name up to 32 alphanumeric characters.
Configures the user name for the projector. You can specify a
user name up to 32 alphanumeric characters.
4
5
®
control system.
Description
Description
3. Web Control
69
Advertisement
Table of Contents
