5 Fastening the cables
Use the supplied cable tie
to fasten the cables.
6 Fastening the adapter cover
USB wireless adapter: USB-WL-11N
1.
Loosen the screw (marked with triangle) on the bottom left of the WIRELESS
port.
2.
Insert the tab of the cover into the hole at the upper right of the WIRELESS
port in the direction of the arrow.
3.
Align the screw holes on the projector and the cover. Then insert the screw
removed from the projector into the hole and tighten the screw.
Temperature range: 0 ~ 45 °C (Operating)
Cable tie
Tab
3